29 Comments(s). 1 Pages(s). Showing page 1. [ 1 ]

   #14. Posted at 02:58 PM on Oct 15th 2007 Edit   Reply
IntelMole
Hang on. They can't even take advantage of a 1333MHz bus.
collapse
#14, 1.6Ghz FSB = epenis rights and beta-testing for Nehalem gene...  :  Krogoth  (#17)  «
#17, I think my point was that there is no reason for Intel to...  :  IntelMole  (#21)  «
#21, Why give AMD the chance?  :  tfp  (#29)  «
#14, Yea, anyone got some info on how FSB speed affects Core 2 pe...  :  deathBOB  (#23)  «
#23, It matters in those bandwidth intensive benchmarks with h...  :  coldpower27  (#25)  «

   #3. Posted at 01:42 PM on Oct 15th 2007 Edit   Reply
boing
Will these be supported by the P35 chipset?
collapse
#3, Officially it can't as P35 doesn't support the 1600FSB, but ...  :  Thorburn  (#4)  «
#4, Your post needs a small edit. "P35 doesn't support the 133...  :  crabjokeman  (#12)  «
#12, Yep, had spotted it and then my internet dropped and t...  :  Thorburn  (#18)  «
#18, Yes, not officially, but I have an E6750 running at...  :  gooch02000  (#28)  «

   #19. Posted at 04:36 PM on Oct 15th 2007 Edit   Reply
AbRASiON
I was going to wait for a 45nm cpu but the multipliers are too low, I don't have 9000$ memory so screw it.
collapse
#19, an 8x multiplier isn't so bad.There's a lot of cheap boards ...  :  crazybus  (#20)  «
#20, I refuse to pay that kind of money for an 'overclockable'...  :  AbRASiON  (#26)  «

   #6. Posted at 01:59 PM on Oct 15th 2007 Edit   Reply
Mr Bill
This Penryn based part has a native clock speed of 3.2GHz and a bus speed of 1,600MHz and the one on display was overclocked using a cascade cooler which keept it between -85 to -100 degrees Celcius so it could be overclocked to 5.4GHz, although it had aparently hit 5.6GHz a day earlier. Thats their spelling. ;-)

AMD needs to get a clue and release sneak previews of their top binned CPU's long before they will ever be in the pipeline. Liquid nitrogen is cheap. Surely they have one or two out of the whole lot that can claim a performance crown?
collapse
#6, I think they would if they could. Remember when core 2 was b...  :  indeego  (#7)  «
#6, I'm not going to be impressed until somebody overclocks usin...  :  ew  (#8)  «
#8, Its not a money problem. Conductors and semi conductors s...  :  Mr Bill  (#24)  «

   #10. Posted at 02:42 PM on Oct 15th 2007 Edit   Reply
crose
F that.. things are bottlenecked by slow harddrives anyway.
collapse
#10, If one has that much cash to blow on a CPU, why not some 15k...  :  crabjokeman  (#13)  «
#13, It is because SCSI doesn't really offer anything better f...  :  Krogoth  (#16)  «
#16, true dat! I used to run hard core scsi equipment, befo...  :  albundy  (#22)  «

   #11. Posted at 02:44 PM on Oct 15th 2007 Edit   Reply
BoBzeBuilder
Can I snap one of this into my S939 machine? Don't want to buy RAM and change the motherboard.
collapse
#11, I'm dying here, that's fantastic.  :  StashTheVampede  (#15)  «

   #2. Posted at 12:49 PM on Oct 15th 2007 Edit   Reply
1970BossMsutang
Too bad they are just so expensive :( but then again i suppose if you got a good motherboard you could hold onto the thing for at least 3 years.
collapse
#2, just wait for the cheaper quads and do the same, those will ...  :  tfp  (#9)  «

   #5. Posted at 01:58 PM on Oct 15th 2007, Edited at 02:00 PM on Oct 15th 2007 Edit   Reply
krazyredboy
Oooooooooooooh, Ahhhhhhhhhhhhhhhh.

Ok, but I have only one question: Is it shiny?
collapse

   #1. Posted at 12:40 PM on Oct 15th 2007 Edit   Reply
d2brothe
Drools......
collapse
29 Comments(s). 1 Pages(s). Showing page 1. [ 1 ]
 
Name/Password: / Remember
Reply to:
[click to clear]

[RED] [GREEN]
[BOLD]
[ITALIC] [STRIKE]
[UNDERLINE]

Notice: All posts should abide by the rules, please.
Note: Ctrl-Enter submits the post. (In IE)
DThread keys: Click on a reply to position the blue bar. 'A'/'Z' move it up/down.
Jazztags: (they MUST be closed)
    r{ red }r     g{ green }g     /[ italic ]/     *[ bold ]*
    _[ underline ]_     -[ strike ]-     s[ sample ]s     o[ spoiler ]o  q[ (QUOTE) ]q